TECHNICAL SPECIFICATIONS

Wood Frame Construction

Seat frames are constructed of 3 /4" laminated hardwood plywood that is CNC cut with 5/4 maple cross rails. Ottomans are constructed of 3 /4" laminated hardwood plywood. All mainframe joints are nailed and glued. Stress points are further reinforced with the use of glue blocks that are stapled or screwed in place. Plywood is assembled with notch and pocket type connections.

Sled Base Construction

All legs are constructed of 1" O.D. x 16-gauge round steel tubing welded to 14-gauge steel mounting plate and secured to the frame with 16 #10 x 11 /2" steel pan head wood screws. Optional glides are clear Polycarbonate press-fit to the underside of the metal tubing.

Backrest Supports

Backrest supports are 11 /8" O.D. 16-gauge for lounges with laminated transom, or 12-gauge steel tubing inserted over 7 /8" O.D., 16-gauge steel tubing, for all fully upholstered models. Backrest supports are fastened to the wooden lounge frames using 1 /4-20 steel bolts into steel threaded inserts.

Suspension - Seats & Backs

The seat is constructed with stretch strap webbing, inner woven and stapled into position. Both seats and backs are covered with a layer of FLW (reinforced non-woven fiber) on top.

Foam – Seats & Backs

The back foam has a density of 1.5 and compression of 26 lb. foam that is 3" thick and contour cut for consistency. The seat foam is 6" thick with a density of 2.5 and compression of 45 lb. A .5" super soft wrap covers the front and top of the seat.

Gangers

UL HB rated nylon hooks and glass filled nylon pegs are mounted to 14-gauge steel plates with thread locking screws and steel inserts. The ganging plate assemblies are mounted to the wood frame using 11 /2" #10 wood screws.