GENERAL INFORMATION

Pedestals are available in sizes and drawer combinations to suit any personal storage requirement. Freestanding and mobile units are designed to fit below most work surfaces. 

Preconfigured Units: To simplify the specification process, we offer preconfigured pedestals in the most popular sizes with the most popular internal components. These units are assembled using standard components.

Height: Two pedestal styles are available. Heights include 1/8" allowance for leveling glides fully recessed. Freestanding: 22 ⅜”, 25 ⁹⁄₁₆" and Mobile: 24 ⅝”, 27 ⁹⁄₁₆”.

Depth: Products are available in three standard depths: 17 ⅝", 21 ⅝", and 27 ⅝".

Width: All products are 15" wide.

CONSTRUCTION AND STANDARD FEATURES

Basic Shell: Twenty-gauge steel body with 18 and 20-gauge steel top and box frame front and back uprights. Uprights are notched in 3" intervals for drawer for suspension mounting.

Drawers:

Fronts: Two-piece metal construction. Twenty-two gauge steel outerskin welded to 22-gauge inner liner. With full width inset pull. Drawer fronts overlap front of pedestal.

Three-inch (pencil) drawer: Single wall two-piece construction. Body 22-gauge; back 22-gauge. Operates on two-section ¾” extension ball bearing suspension.

Six-inch (box) drawer: Single wall twopiece construction. Body 22-gauge; back 22-gauge. Operates on two-section ¾ extension ball bearing suspension.

Twelve-inch (file) drawer: Single wall, two-piece construction. Front liner 20-gauge; body 22 gauge. Mounted on full extension slide arm suspensions.

Adjustable Glides: Free standing and floor supporting pedestals include four glides, adjustable from outside the cabinet.

Counterbalance: Counterbalance weight is standard in some mobile units and is recommended in all freestanding units.

Caster Kit: Consists of four twin-wheel hooded casters. Front two casters are locking; rear two casters are non-locking. A fifth wheel is included in some mobile units for additional stability.

Locks: Locks are standard on all units. The lock is a high-security single-bit type. Units are standard with random keys in a range of 100 different numbers. Specific keying combinations are available. This information must be included with the order. 

Paint Finishes: Storage products are chemically etched prior to painting. This process enhances top coat bonding. Standard top coat finishes are primarily electrostatically applied powder and/or medium solids ALKYD baking enamel. Both the dry application powder coat and wet application enamel are fused and cured in a baking oven to provide a stain and scratch resistant surface.

All inside and outside shell and drawer front surfaces are painted with the same specified paint color.

Interior components and accessories are Dark Tone. Mechanical components are black chrome-plated.

See colors available here.