STAND ALONE WORK SURFACE

• How to use

  • Stand alone with standard leg bases only

  • Can be set up as part of a workstation but cannot be connected directly to another work surface

• Sixteen sizes available
• Rectangular surface with straight front
• Height adjusts from 27"-43"
• Modesty panel models are designated by the -M after inventory number
• Choose the Laminate, T-Molding Color and Frame Color
• Includes one or more rectangular grommets, see color choice - please talk to your CSI Sales Representative during the design phase

Each leg assembly is comprised of 1⅜" x 2 ¾" x 16-gauge steel tube that telescopes inside a 2" x 3" x 14-gauge steel outer leg tube. Nylon bushings ensure a smooth, telescoping action between the tubes. A 14-gauge, draw-formed foot is welded to the outer leg tube, and provides strength and room for carpet levelers in a low profile,sculpted component. An 11-gauge steel, draw-formed work surface support is welded to the inner tube, and provides strength to support large, cantilevered loads on the work surface. Extruded aluminum covers are attached to the front and back of the upright tubing for visual appeal.

The table is manually adjustable from 27" to 43" by turning a crank. The crank raises or lowers the table at a rate of 1 inch per 10 revolutions. A lifting mechanism inside of each leg provides a uniform lifting force to the work surface, regardless of the loading condition. Each mechanism is comprised of a steel acme-threaded rod turning through a delrin lead nut. The delrin nut provides a silent operation, low friction, and excellent wear characteristics.

The acme rods deliver a lifting force to the underside of the surface supports. Precision needle roller bearings provide a smooth, quiet interface between the rotating acme rods and the surface supports. The lifting mechanisms are synchronized via a ¼" pitch roller chain that spans the distance between the table legs. The chain engages each acme-threaded rod through a delrin sprocket that is attached to the rod.