STAND ALONE WORK SURFACE

• How to use
  • Stand alone with standard leg bases only
  • Can be set up as part of a workstation but cannot be connected directly to another work surface
  • Must be placed close to an AC outlet
• Ten sizes available
• Rectangular surface with straight front
• Height adjusts from 24-51"
• Adjustable glides
• Work surfaces are undersized by 1 ¼" from side-to-side and ½" from back-to-front from the stated dimensions
• Modesty panel models are designated by the -M after inventory number

• Choose the Laminate, T-Molding Color and Frame Color

• Includes one or more rectangular grommets, see color choice - please talk to your CSI Sales Representative during the design phase

Each leg assembly is comprised of a triple telescoping steel tube with an overall dimension of 4.3" x 2.28". Extruded aluminum covers are attached to the back of the upright tubing for visual appeal. The table is electrically adjustable from 24" to 51" by pressing a button. Motors raise or lower the table at a rate of 1.7 inches per second. The motors drive a lifting mechanism inside of each leg to provide a uniform lifting force to the work surface, regardless of the loading condition. The parallel connectors synchronize the motors electronically. The controller keeps track of each motor revolution, and ensures that the motors remain in perfect  synchronization. The user interface occurs at the switch. The deluxe includes three memory presets and a visual display indicating the height of the work surface.

BEFORE YOU ORDER:

• Standard Controls (3 Preset Buttons)      Item# - S      Base Price
• Deluxe Controls (3 Presets and Digital Readout)      Item# - D      Base Price + $36
• Standard Controls with Modesty Panel      Item# - SM      Base Price + $60
• Deluxe Controls with Modesty Panel      Item# - DM      Base Price + $96

Operation using the Standard Switch:

To raise or lower the unit, push and hold the Up or Down button, then release when the desired position is reached.

To store a position in memory, raise or lower the unit to the desired position. Press the Store memory button, then push the desired Memory button (1, 2 or 3) within two seconds. The position will be stored in memory. Up to three positions may be stored in memory.

To raise or lower to a pre-programmed position, push Memory buttons 1, 2 or 3 and hold until desk height reaches the stored position.

See more information here.